Vredo VT7028-3

Description

https://youtu.be/YELnlEvu2H0
VT7028-3
Vredo VT7028-3
· Machinenumber: 0111.023
· Year of construction: 2018
· Hours: ±8.800
· Tyre pressure inflation system
· Trimble TMX RTK
· Including 36m Vogelsang
Specification:
· Engine Deutz TCD 16.0 V8, 505 kW / 687 hp water cooled
· EU Stage 4 / Tier IV FINAL with SCR (AdBlue)
· Max. Torque 2890 Nm@ 1400 rpm
· Transmission: Vredo VVT700 CVT stepless transmission
· Two forward speed ranges, 0-20 kph and 0-40 kph
· Reverse speed 0-17.5 kph
· Fuel tank capacity 650 Litres
· AdBlue tank capacity 85 Litres
· Full air suspended Comfort Claas cab, incl. radio/CD player with Bluetooth (with external microphone for
phone calls)
· Fully automatic climate control
· Operational console in RH armrest, fitted on seat, incl. Drive- and Slurry system, Joy-Stick and
Touchscreen-Terminal
· All machine and slurrysystem data on Hydac touchscreen terminal
· Air suspended Grammer Maximo Super-Comfort seat
· Passenger seat
· Electrical adjustable and heated mirrors, incl. wide angle mirror
· Cigarette lighter
· Cruise control with anti-stall control
· Continuously all wheel drive with lockable length differential for front axle and tandem rear axles
· Front and rear axles with lockable cross differential, pressure operated switch in cabin
· Steering: 6-wheel and Crab steer (Tandem wheels partly crab steer)
· Hydraulic suspended front- and rear axles with automatic level control and shock absorption
· 3-Point, CAT 3 dimensions, double working hitch at rear, slewed with crab steer, torsion suspended CAT
4 quick couplers for toolbar suspension. Active controlled automatic ground adaption with pressure or
free ground following or floating
· Lift height 660mm, max height ca. 1m with 900-tires
· Lift capacity in Balls max. 105kN (10.5 ton) through 75 kN (7,5 ton)
· Manual control of 3-point hitch at rear fender of the machine
· Automatic greasing system SKF with 4L grease reservoir
· 1 Pump for closed loop system max 260 l/min, 420 bar. Slurrypump drive gear
· 2 LS-Pumps, 190 l/min each, at 200 bar, for external spool valves and internal functions such as
suspension, steering, 3-point hitch, cooling, etc.
· 4 Double/Single rear hydraulic spool valves, operated from cabin
· Standard pressure free return line 3/4"
· Reversing alarm
· Rear camera and LCD-colour monitor with speaker in cabin
· Connection for second camera at the rear of the Trac
· Telescopic cylinder for tipping slurry tank from chassis
· 2 Rotating beacons on cabin
· LED headlights in front bumper
· 2 LED work lights behind cabin
· 2 LED work lights under the cabin
· 4 LED work lights in cabin roof
· Compressed air system for cleaning cabin and cooling unit
· Quick coupling for air at the rear of the Trac
· Telescopic ladder for inspection
· Fire extinguisher, 5 kg
OPTION TÜV VT 7028-3
Modifications in order to "Deutschen Rechtsvorschriften für Straßentransport"
· Emergency steering with electrical hydraulic pump
Warning signs in the front and rear of machine
· License-plate holder at the rear of machine
· Indication of max. speed
· Wheel chocks
· Tüv approval 40 kmh with certificate
TPIS 7028-3 MOTOR COMP.
Tyre pressure inflation system by motor compressor 350 ltr/min by 1500 rpm
· System for standard 900 tyres with 3,0 m outside dimension
· Pipelines mounted at the outside of the tyres, removable for transport
· Including control from cabin
· 2 different settings on display for driving in the field or on the road
· The actual pressure values can be seen on the touchscreen terminal, pressure front and rear axles
displayed separately
OPTION VT7028-3 TRIMBLE TMX/RTK
· Trimble Autopilot RTK with TMX 2050 terminal
· AG25 GNSS Antenna mounted above 3 point hitch swivel point
· Complete integrated in steeringsystem Trac
· Crab-steer functionality
· The Trimble has standard the Glonass and GPS satellites
· Standard EGNOS signal 0-30 cm precision (absolute 0-2 mtr.)
· Precision with RTK correction signal 0-2 cm (absolute 0-2,5 cm)
· Excl. RTK correction signal license
· System is prepared for correction signal via a SIM-card modem
· RTK agreement from supplier (Trimble) to discuss together with customer
· Complete installed and tested
TANK VT7028-3 ZBV 32000Zs FLEXTANK
The tank ZBV 32000Zs is equipped with the following as standard:
· Construction of gel-coated glass-fiber polyester with 6 slosh baffles
· Tank volume 25 m³, with top slurry bag (7 m3) till 32m³
· Tank mounted on a steel intermediate frame and hydraulical tippable
· Tank simple to demount because of fitment on Twist-Locks
· Tank with open aeration/de-aeration
· Automatic switch of pump at loading and unloading
· Mechanical level gauge and electronically displayed on terminal
· Load volume to be pre-set at terminal
· 8" 3-Way valve at rear of tank for loading, unloading and recirculating
· LED Worklights at rear of tank
· Rotating beacon and camera on backside of tank
· 2 inspection hatches on top of tank
· Weight ca. 5.500 kg
ZBV 32000Zs PREP. VOGELS. SWINGMAX
· Hydraulic controlled brackets and hooks on tanksides
· Extended CAT 4 quick-connect hooks
· 4-point cross connection on back of tank with stable framework
· Crab steering possible for Trac, not for implement
· Slurry distribution box with 2x 6" quick coupling
· Electro / hydraulic modification
· Software modification
PUMP FILTER UNIT PF12000
Specification:
· Complete unit mounted at front of chassis
· Vogelsang positive displacement pump VX186-520QD 12.000 ltr/min with hydrostatic drive
· Vredo slicing filter FT 6200 with hardened steel interior and emptying device to be operated from cabin
· 10" DN250 front reload docking arm slewable 135 degrees
· Return turning provision of the slurry pump
· Loading of tank at reduced engine speed (1.000 rpm)
· Electro-hydraulic operation by multi-grip joy-stick
· Configuration of slurry system parameters on terminal
· 6" reload connection in front of PF-unit
· Reloadarm automation
Clean water-reservoir and small storage compartment
· LED headlights in front bumper
TELESC. RELOAD DOCKING ARM PF12000
10" telescopic reload docking arm 1,6 m extendible. Till ca. 7,2m measured from the front axle at a height of
4m
· With 10" docking ball
· 2 hydraulic cylinders to adjust length of docking arm
· Air operated sealing
· 4" aeration valve