Vredo VT5536

Description

VT4556-V
· Machinenumber: 0114.002
· Hours: ca. 2.000
· Year of construction: 2022
· John Deere SF1 GPS
· Tirepressureinflationsystem
· Section control
· Dutch/German Homologation
Specification:
· Engine Scania DC13 L6, 405 kW / 550 hp water cooled
· EU Stage 5 with SCR (AdBlue) and DPF
· Max. Torque 2480 Nm@ 1400 rpm (2420 @ 1100 rpm)
· Transmission: Vredo VVT550 stepless transmission
· One forward speed range, 0-40 kph
· Reverse speed 0-17 kph
· Fuel tank capacity 845 Litres
· AdBlue tank capacity 63 Litres
· Semi air suspended Comfort Claas cab, incl. radio/CD player with Bluetooth (with external microphone
for phone calls)
· Fully automatic climate control
· Windscreen wipers are mounted on the left and right door of the cabin
· Operational console in RH armrest, fitted on seat, incl. Drive- and Slurry system, Joy-Stick and
Touchscreen-Terminal
· All machine and slurrysystem data on Hydac touchscreen terminal
· Air suspended Grammer Maximo Super-Comfort seat
· Instructor seat
· Electrical adjustable and heated mirrors, incl. wide angle mirror
· Efficient drivertrain through Ecomode
· Cruise control with anti-stall control
· Continuously all wheel drive with lockable length differential for front axle and rear axle
· Front and rear axle with lockable cross differential, pressure operated switch in cabin
· Steering: 4-wheel and Crab steer
· Tyres Michelin VF900/60R42 CFO+ 195A8 TL CEREXBIB2
· Hydraulic suspended front axle with automatic levelling and pendule absorption
· 3-Point, CAT 3 dimensions, double working hitch at rear, slewed with crab steer, torsion suspended CAT
4 quick couplers for toolbar suspension. Active controlled automatic ground adaption with pressure or
free ground following or floating
· Lift height 660mm, max height ca. 1m with 900-tires
· Lift capacity in Balls max. 105kN (10.5 ton) through 75 kN (7,5 ton)
· Manual control of 3-point hitch at rear fender of the machine
· Automatic greasing system with 4L grease reservoir
· 1 Pump for closed loop system max 243 l/min, 420 bar. Slurrypump drive gear
· 2 LS-Pumps, 180 l/min each, at 200 bar, for external spool valves and internal functions such as
suspension, steering, 3-point hitch, cooling, etc.
· 4 Double/Single rear hydraulic spool valves, operated from cabin
· Standard pressure free return line 3/4"
· Reversing alarm
· Rear camera and LCD-colour monitor with speaker in cabin
· Connection for second camera at the rear of the Trac
· Telescopic cylinder for tipping slurry tank from chassis
· 2 Rotating beacons on cabin
· LED headlights in front bumper
· 2 LED work lights behind cabin
· 2 LED work lights under the cabin
· 4 LED work lights in cabin roof
· Compressed air system for cleaning cabin and cooling unit
· Quick coupling for air at the rear of the Trac
· Fire extinguisher, 5 kg
· Vredo Trac is delivered as standard with emergency support kit, set contains most important fuses,
sensors, plugs and o-rings
OPT. TPCS VT5536 MOTOR COMP.
Tyre pressure inflation system by motor compressor 850 ltr/min by 4 bar and 1500 rpm
· System for standard 900 tyres with 3,0 m outside dimension
· Pipelines mounted at the outside of the tyres, removable for transport
· Including control from cabin
· 2 different settings on display for driving in the field or on the road
· The actual pressure values can be seen on the touchscreen terminal, pressure front and rear axles
displayed separately
OPT. TÜV VT5536
Modifications in order to "Deutschen Rechtsvorschriften für Straßentransport"
· Emergency steering with electrical hydraulic pump
· Warning signs in the front and rear of machine
· License-plate holder at the rear of machine
· Indication of max. speed
· Wheel chocks
· Support axle
· Tüv approval 40 kmh with certificate
Attention: Only applicable for Germany
OPTION JD GPS SF1
· John Deere AutoTrac with GreenStar 4640 Display
· StarFire 6000 GNSS SF1 receiver
· JD Link
· Complete integrated in Trac steering system
· Shifting (GPS) track by changing off-set on terminal by hand for crab-steering mode. For automatic track
shifting option 0113O019-01 is required or 0113O020-01 in combination with NIR
· StarFire antenna mounted on front of cabin
· John Deere use as a standard the Glonass and GPS satelites
· Precision with SF1 signal 0-15 cm
· Complete assembled and tested
EXTRA OPERATION LIGHTKIT FENDERS
· 2 additional LED working lights on fenders behind cabine
TANK VT5536 ZBV 22000V
The tank ZBV 22000V is equipped with the following as standard:
· Construction of gel-coated glass-fiber polyester with 4 slosh baffles
· Tank volume 22 m³
· Tank mounted on galvanised intermediate frame and hydraulically tippable
· Tank easy to demount because of fitment on Twist-Locks
· Tank with open aeration/de-aeration
· Automatic switch of pump at loading or unloading
· Mechanical level gauge and electronically displayed
· Load volume to be pre-set at terminal
· 8" 3-Way valve at rear of tank for load, unload and recirculating
· LED Worklights at rear of tank
· Rotating beacon and camera on backside of tank
· 2 inspection hatches on top of tank
EXTRA OPERATION LIGHTKIT ON TANK
· 2 additional LED working lights on back of tank beside to standard working lights on tank
· Assembled 1x on leftside and 1x on rightside of tank
PUMP FILTER UNIT PF12010 VT5536
Specification:
· Complete unit mounted at front of chassis
· Vogelsang positive displacement pump VX186-520QD 12.000 ltr/min with hydrostatic drive
· Vogelsang pump equipped with axial wear plates
· Vredo slicing filter FT 6200 with hardened steel interior and emptying device to be operated from cabin
· 10" DN250 front arm slewable 135 degrees
· Return turning provision of the slurry pump
· Loading of tank at reduced variable engine speed
· Electro-hydraulic operation by multi-grip joy-stick
· Configuration of slurry system parameters on terminal
· 6" reload connection in front of PF-unit
· Reloadarm automation
· LED headlights in front bumper
· Bumper standard equipped with extra (flexible) step
OPTION CENTRIFUGAL PUMP IN PF12010
Centrifugal pump in the upper section on standard docking reloadarm:
· For more reload capacity up to 16.000 ltr/min
· Hydrostatic driven by a seperate hydropump, till 200 hp power possible
· Aeration valve
· Works together with positive displacement in pump by-pass
TELESC. RELOAD DOCKING ARM PF12000
10" telescopic reload docking arm 1,6 m extendible. Till ca. 7,2m measured from the front axle at a height of
4m
· With 10" docking ball
· 2 hydraulic cylinders to adjust length of docking arm
· Air operated sealing
· 4" aeration valve