Vredo VT4556-V
Basic information
Description
VT4556-V
· Machinenumber: 0121.034
· Hours: ca. 1.200
· Year of construction: 2022
· Trimble: TMX/RTK
· Tire pressure inflation system
· BKT Tires
· RDW
· Motor Scania DC 13, 6 cylinder line, 12,7 liter, 331 kW / 450 h.p. water cooled
· EU Stage 5 (V) with SCR (Ad Blue) and DPF
· Maximum torque 2150 Nm @ 900-1450 rpm
· Maximum power 331 kW / 450 h.p. @ 1500 -1650 rpm
· Powered mechanical-hydraulically stepless 0 - 40 km/h at 1,500 engine rpm, automatically controlled
· Fuel tank approx. 600 liters ( 2 x 300 ltr.)
· Ad Blue Tank 60 liters
· Suspended SuperComfort Claas-Vredo cabin, incl. radio / CD player with bluetooth (with external
microphone for phone calls)
· Fully automatic air conditioning
· Windscreen wipers are mounted on the left and right door of the cabin
· Operation console fitted to seat incl. joy-stick and touch-screen controller
· Actual information (pressures/ temperatures of the machine) are visible via the touchscreen
· Air suspended super comfort Grammer Maximo seat
· Instructor seat
· Electrically adjustable and heated mirrors incl. wide angle mirror
· Cruise control
· Front and back axles are fitted with a mechanical differential lock
· Rear axle constant drive, front-axle shiftable from cab (4 wheel drive)
· Two speed ranges, fieldrange 0-20kmh, roadrange 0-40kmh
· Equipped with engine break / hill break
· Steering 2-wheel, 4-wheel and crab steer.
· Suspended front axle with level and stabilisation control
· 3-point double working proportionally regulated rear linkage, torsion suspended and fitted with applicator
suspension.
· Actively controlled: following, suspended or pressure releasing from cabin
· Control for rear linkage with remote control mounted on rear of slurry tank
· Automatic central lubrication system for basic vehicle with 4L reservoir
· 1 closed system pump max 177 l/min, 420 bar for powering the slurry pump
· 1 LS-pump, 170 l/min, 200 bar for external hydraulics
· 1 LS-pump, 170 l/min, 200 bar for PF-unit
· 1 LS-pump, 86 l/min, 200 bar for cooler (and optional TPIS)
· For ext. hydraulic and linkage pressure compensated valves are mounted
· 4 Double and single acting valves on rear (2 with check valves, 2 with open neutral position)
· Equipped with free return line ½"
· Reversing alarm
· Rear camera and LCD-colour monitor with speaker in cabin
· Connection for second camera at the rear of the Trac
· Telescopic cylinder for tipping tank from chassis
· 2 Rotating beacons on cabin
· LED headlights in front bumper
· 2 LED working lights behind cabin
· 2 LED working lights under the cabin
· 4 LED working lights in cabin roof
· Compressed air system for cleaning cabin and cooling unit, connection behind cabin on buffer tank and
connection next to cooling unit
· Clean water reservoir, 43 Ltr.
· Small storage compartment, 100 Ltr.
· Quick coupling for air at the rear of the Trac
· Fire extinguisher, 5 kg
Pre-installation for the PF9020 and 19500V:
· Spreading data storable via USB
· Hydraulic and electric connections for PF 9020
· Intake and discharge pipes for slurry pump/tank under cabin
· 3-pole 12V power connection at rear of the machine
TPIS VT4556-V EXT. COMP.
Tyre pressure inflation system with a screw compressor 3500 ltr/min.
· Including control from cabin
· 2 different settings on display for driving in the field or on the road
· The actual pressure values can be seen on the touchscreen terminal, pressure of front and rear axles
are displayed separately
VT4556/19500 TRIMBLE TMX/RTK
· Trimble Autopilot RTK with TMX 2050 Display
· TMX 2050 Display with Precision IQ software
· AG25 GNSS Antenna mounted above 3 point hitch swivel point
· Complete integrated in Trac steering system
· The Trimble uses as standard the Glonass and GPS satellites
· Standard EGNOS signal 0-30 cm precision (absolute 0-2 mtr.)
· Precision with RTK signal 0-2 cm (absolute 0-2,5 cm)
· Excl. RTK correction signal license
· System is inclusive a RTK SIM-card modem
· RTK agreement from supplier (Trimble) to discuss together with customer
· Complete installed and tested
TRIMBLE TMX SECT.CONTR. ISO VT4556
· Trac is supplied with a GeoSwitch-ISO controller, to create a connection between Trimlbe GPS-system
and dosing computer
· GeoSwitch-ISO Controller on Trac provides signals to CanBus controller on injector to switch sections on
and off
· Application rate is regulated when switching sections on and off
· Possibility to apply and dose slurry by prescription application maps
· For the use of application maps no seperate controller is necessary
· Section Control of the injector through ISO-BUS connector plug on the rear of the Trac.(suitable for
section-control as standard and fused at 30A instead of 60A)
TANK VT4556 ZBV 19500V
The tank ZBV 19500V is equipped with the following as standard:
· Complete fibreglass construction on steel frame with twistlocks
· Light weight
· Tank volume 19,5 m3
· Tank is easy to remove through twistlock system
· Tank with open aeration/de-aeration
· Pump automatically switches off when full or empty
· Tank can be hydraulically lifted for maintenance
· 2 Suction hoses 6" 4 m PVC (1x suction hose & 1x connection hose)
· 2 LED working lights on backside of tank
· LED street lighting on backside of tank
· License plate holder incl. light on backside of tank
· Rotating beacon and camera on backside of tank
· 2 inspection hatches on top of tank
· Extra big mudflaps
PUMP-FILTER UNIT PF9020
Specifications:
· Vogelsang displacement pump VX186-390QD 9000 l/min with
spiral plungers
· Vogelsang pump equipped with axial wear plates
· Reverse option on slurry pump with touchscreen
· Filling at reduced engine speed (1,200 rpm)
· Cutting filter VREDO FT5200 with dirt ejector, opened and emptied from cabin
· Suction arm 8", can be swivelled 120°
· Flexible suction arm by means of rotating slewing ring
· 160° swivelling front-suction connection 6"
· Electric/hydraulic operating
· Dosing independent of driving speed and working width, slurry distribution can be pre-set
· LED street lighting in front bumper
· Bumper standard equipped with extra (flexible) step
· Working light on loading arm
· Standard equipped with aeration on loading arm