VREDO VT7138-3 + Vogelsang SwingMax 36meter

Description

VREDO VT 7138-3 With Vogelsang SwingMax 36m
Year 2021
Hours: 5800
Machine nr. 0113.004

VT7138-3 PREPARED FOR ZBV 32000Z
Specification:
Engine Scania DC16 317A V8, 522 kW / 710 hp water cooled
EU Stage 5 with SCR (AdBlue) and DPF
Max. Torque 3320 Nm@ 1400 rpm
Transmission: Vredo VVT700 CVT stepless transmission
Two forward speed ranges, 0-20 kph and 0-40 kph
Reverse speed 0-17 kph
Fuel tank capacity 845 Litres
AdBlue tank capacity 69 Litres
Full air suspended Comfort Claas cab, incl. radio/CD player
with Bluetooth (with external microphone for phone calls)
Fully automatic climate control
Operational console in RH armrest, fitted on seat, incl. Drive-
and Slurry system, Joy-Stick and Touchscreen-Terminal
All machine and slurrysystem data on Hydac touchscreen
terminal
Air suspended Grammer Maximo Super-Comfort seat
Passenger seat
Electrical adjustable and heated mirrors, incl. wide angle mirror
Efficient drivertrain through Ecomode
Cruise control with anti-stall control
Continuously all wheel drive with lockable length differential for
front axle and tandem rear axles
Front and rear axles with lockable cross differential, pressure
operated switch in cabin
Steering: 6-wheel and Crab steer (Tandem wheels partly crab
steer)
Tyres Mitas 900/60 R42 SFT CHO 192 A8
Hydraulic suspended front axle with automatic levelling and
pendule absorption
Tandem rear axles with mechanical penduling
3-Point, CAT 3 dimensions, double working hitch at rear,
slewed with crab steer, torsion suspended CAT 4 quick
couplers for toolbar suspension. Active controlled automatic
ground adaption with pressure or free ground following or
floating
Lift height 660mm, max height ca. 1m with 900-tires
Lift capacity in Balls max. 105kN (10.5 ton) through 75 kN (7,5
ton)
Manual control of 3-point hitch at rear fender of the machine
Automatic greasing system with 4L grease reservoir
1 Pump for closed loop system max 267 l/min, 420 bar.
Slurrypump drive gear
2 LS-Pumps, 170 l/min each, at 200 bar, for external spool
valves and internal functions such as suspension, steering, 3-
point hitch, cooling, etc.
4 Double/Single rear hydraulic spool valves, operated from
cabin
Standard pressure free return line 3/4"
Reversing alarm
Rear camera and LCD-colour monitor with speaker in cabin
Connection for second camera at the rear of the Trac
Telescopic cylinder for tipping slurry tank from chassis
2 Rotating beacons on cabin
LED headlights in front bumper
2 LED work lights behind cabin
2 LED work lights under the cabin
4 LED work lights in cabin roof
Compressed air system for cleaning cabin and cooling unit
Quick coupling for air at the rear of the Trac
Fire extinguisher, 5 kg
Vredo Trac is delivered as standard with emergency support kit,
set contains most important fuses, sensors, plugs and o-rings
Vredo Trac is delivered as standard with 2 year Remote
Teleservice License (Vredo Service is able to login on machine
for trouble shooting). After two years the customer could decide
to buy a new license.

TPIS 7138-3 MOTOR COMP.
Tyre pressure inflation system by motor compressor 850 ltr/min by 4
bar and 1500 rpm

System for standard 900 tyres with 3,0 m outside dimension
Pipelines mounted at the outside of the tyres, removable for
transport
Including control from cabin
2 different settings on display for driving in the field or on the
road
The actual pressure values can be seen on the touchscreen
terminal, pressure front and rear axles displayed separately

OPTION TÜV VT 7138-3
Modifications in order to "Deutschen Rechtsvorschriften für
Straßentransport"
Emergency steering with electrical hydraulic pump
Warning signs in the front and rear of machine
License-plate holder at the rear of machine
Indication of max. speed
Wheel chocks
Tüv approval 40 kmh with certificate

Attention: Only applicable for Germany

SUPPORT AXLE VT7138-3
Support axle for VT7138-3
Required for the German road approval in case a wide ≥ 30m)
dribble bar-or trailing shoe implement is mounted, and front
axle weight is over 11,5 ton
Increased permitted total weight

EXTRA OPERATION LIGHTKIT FENDERS
2 additional LED working lights on fenders behind cabine\
OPTION VT7138 TRIMBLE GPS TMX/RTK
Trimble Autopilot RTK with TMX 2050 terminal
TMX 2050 Display with Precision IQ software
AG25 GNSS Antenna mounted above 3 point hitch swivel point
Complete integrated in steeringsystem Trac
Crab-steer functionality
The Trimble has standard the Glonass and GPS satellites
Standard EGNOS signal 0-30 cm precision (absolute 0-2 mtr.)
Precision with RTK correction signal 0-2 cm (absolute 0-2,5 cm)
Excl. RTK correction signal license
System is prepared for correction signal via a SIM-card modem
RTK agreement from supplier (Trimble) to discuss together with
customer
Complete installed and tested
OPTION WINDSCREEN WIPERS ON CAB
Windscreen wipers are mounted on the left and right door of
the cabin
Switches for operation are mounted in cabin roof

TANK VT7138-3 ZBV 32000Zs FLEXTANK
The tank ZBV 32000Zs is equipped with the following as standard:
Construction of gel-coated glass-fiber polyester with 5 slosh
baffles
Tank volume 25 m³, with top slurry bag (7 m3) till 32m³
Tank hydraulically tippable
Tank easy to demount because of fitment on Twist-Locks
Tank with open aeration/de-aeration
Automatic switch of pump at loading or unloading
Mechanical level gauge and electronically displayed
Load volume to be pre-set at terminal
8" 3-Way valve at rear of tank for load, unload and recirculating
LED Worklights at rear of tank
Rotating beacon and camera on backside of tank
1 inspection hatch on backside of the tank

ZBV 32000Zs PREP. VOGELS. SWINGMAX
Brackets and transportsupports on tanksides
Extended CAT 4 quick-connect hooks
4-point connection on back of tank with stable framework
Crab steering possible for Trac, not for implement
Slurry distribution box with 2x 6" quick coupling
Electro / hydraulic modification
Software modification

EXTRA OPERATION LIGHTKIT ON TANK
2 additional LED working lights on back of tank beside to
standard working lights on tank
Assembled 1x on leftside and 1x on rightside of tank

PUMP FILTER UNIT PF12000
Specification:
Complete unit mounted at front of chassis
Vogelsang positive displacement pump VX186-520QD 12.000
ltr/min with hydrostatic drive
Vogelsang pump equipped with axial wear plates
Vredo slicing filter FT 6200 with hardened steel interior and
emptying device to be operated from cabin
10" DN250 front arm slewable 135 degrees
Return turning provision of the slurry pump
Loading of tank at reduced variable engine speed
Electro-hydraulic operation by multi-grip joy-stick
Configuration of slurry system parameters on terminal
6" reload connection in front of PF-unit
Reloadarm automation
LED headlights in front bumper
Bumper standard equipped with extra (flexible) step

Always with one of the following options:
1932O002-01
1932O010-01
1932O001-02
1932O101-01

TELESC. RELOAD DOCKING ARM PF12000
10" telescopic reload docking arm 1,6 m extendible. Till ca. 7,2m
measured from the front axle at a height of 4m

With 10" docking ball
2 hydraulic cylinders to adjust length of docking arm
Air operated sealing
4" aeration valve

OPTION CENTRIFUGAL PUMP IN PF12010
Centrifugal pump in the upper section on standard docking
reloadarm:
For more reload capacity up to 16.000 ltr/min
Hydrostatic driven by a seperate hydropump, till 200 hp power
possible
Aeration valve
Works together with positive displacement in pump by-pass